1 Count Diamond Core Drill Bit, 1-3/8 inch, 35mm, 5/8"-11 Thread, Black Oxide Finish, Ideal for Concrete, Stone, Tile, Brick, Masonry
Product details
| Management number | 209973058 | Release Date | 2026/04/02 | List Price | $14.36 | Model Number | 209973058 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The spiral chip flute design at the cutting part of the cutting edge makes it easier to discharge the debris. Drilling with a rotary drill can significantly improve the drilling speed and efficiency. 1 cm thick all-ceramic tiles, dry more than 30 holes! -Shake while punching, faster Discharge the debris and increase the punching speed. :01 The faster the speed, the more the number of holes, the recommended speed is above 2600rpm! :02It is not recommended to use rechargeable drills/ordinary impact drills/low-speed electric hand drills! :03 It is forbidden to use vertical hard top and pressing hard, otherwise it will greatly reduce the service life! How to use: Install the hole opener on a hand drill or angle grinder. The hand drill needs to be equipped with a conversion chuck. When drilling, the electric hand drill maintains a high rotation speed throughout the whole process, and tilts at 45¡ã, lightly against the tiles, the smaller the force, the less slippery it is, and the crescent-shaped positioning groove is punched out. After drilling the positioning groove, slowly vertical the electric drill, and shake it while drilling, so that it is more convenient to discharge the debris and improve the drilling speed. It is forbidden to vertically hard top and press hard, otherwise it will greatly shorten the service life. Note: It is not recommended to use rechargeable drills/ordinary impact drills/low-speed hand drills! It is forbidden to vertically hard top and press hard, otherwise it will greatly shorten the service life. When drilling holes, please wear protective gloves, glasses, face shields, etc. to prevent splashed debris from entering your mouth, nose and eyes.
- Packing:Dry Diamond Drill Bits 1-3/8inch
- Diameter 35mm, drilling depth 58mm,5/8"-11 Thread, total length 85mm
- Drilling the material. Concrete, granite, marble, stone, tile, Brick,Block,Mortar, etc.
- Usage: Firstly tilt 45¡ã to open the positioning slot, and then punch vertically, shaking while punching
- The spiral chip flute design at the cutting part of the cutting edge makes it easier to discharge the debris. Drilling with a rotary drill can significantly improve the drilling speed and efficiency.
| UPC | 780669730820 |
|---|---|
| Model | BSRT-ZT01052-5 |
| Shank Type | Round with Flats |
| Unit Count | 1 Count |
| Finish Types | Black Oxide |
| Manufacturer | BSRTTOOl |
| Material Type | High Carbon Steel |
| Item Dimensions | 1.38 x 3.35 x 1.38 inches |
| Tool Flute Type | Straight |
| Cutting Diameter | 35 Millimeters |
| Number of Flutes | 4 |
| Minimum Bore Diameter | 0.38 Inches |
| Surface Recommendation | 石 |
Bestseller ranking
Masonry Core Drill Bits
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form